* Speed depends on the filling volume, product properties, thickness of packaging material, and package dimensions.
Technical parameters
| Packaging type | Pouch |
| Product to be packed | Granular and powder products |
| Dosing range | 20-1000 g |
| Speed* | 600-1200 |
| Packaging material | PP, PE films |
| Film roll Width/Diameter, max. | 380/300 mm |
| Final package dimensions Length*Width, max. | 300*190 mm |
| Electricals | 220 V 50 Hz |
| Power | 1 kW |
| Dimensions Length*Width*Height, max. | 1100*1200*2600 mm |
| Weight, max. | 210 kg |
Available types of fillers
Linear weigh filler
Cup filler
Auger filler
Description
Semi-automatic pouch filling machine SPM is designed for filling granular and powder products, such as cereals, snacks, nuts, pulses, grains, spices, coffee, tea, and other similar products in 3-side seal pouches.
It is possible to manufacture a semi-automatic pouch filling machine of increased dimensions – the maximum film width will be up to 500 mm, the height of the pouch – up to 400 mm, and the width – up to 240 mm.
Working principle*
The product is filled through the throat of the product hopper onto a vibrating chute, which vibrates with a predetermined amplitude and feeds the product into the weighing bucket. The bucket is connected to the filler with a strain gauge. After reaching the set weight parameters, the load cell sends a signal to the filler control unit, which stops the vibrating chute.
The sealing unit is activated when the operator presses the mechanical drive pedal. At the same time, the controller of the semi-automatic pouch filling machine sends a signal to the filler to dispense a set volume of product.
The filler controller signals the weighing bucket to open. The bucket opens, feeding the product through the hose. The product is filled into a formed film sleeve with a sealed vertical & horizontal seams. At this time, the controller turns on the vibrating chute to fill the weighing bucket with the next dose of the product.
The seam sealing unit works on the principle of constant heating. During the sealing process, filled pouches are also separated by a mechanical knife.
* For a machine with a linear weigh filler.
